S-4904T/R (Gold-Mount) SDI/HDMI 2200ft Wireless System

The transmitter S-4904T supports:

• 3G/HD/SD-SDI input x1
• HDMI x1

The receiver S-4904R supports:

• 3G/HD/SD-SDI output x1
• HDMI x1

The receiver SDI and HDMI are output simultaneously. If both SDI and HDMI is input to transmitter, the receiver will give priority to output SDI signal.

In Line of Sight, the S-4904 wireless transmission system support approx. 2200ft effective transmission distance of uncompressed 3G/HD/SD-SDI and HDMI signal, and the latency is less than 1 millisecond.

The S-4904 supports SDI and HDMI embedded audio (ch-1 & ch-2) transmission.

The S-4904 wireless system runs at 5.1-5.9GHz License-free operation frequency. The frequency bands are user configurable and support at most 4 wireless channels in one location. The radio power is less than 63mW and will not do harm to human bodies.

You can set several S-4904R receivers at the same frequency bands as the 1 S-4904T transmitter to enable the multicast mode.

The transmitter S-4904T is equipped with Gold mount plate, to be easily fixed on cameras and attached with batteries. The receiver S-4904R is equipped with Gold mount plate to be powered by batteries. Both the transmitter and receiver can also be powered via the 5.5/2.1mm pole DC in socket of 6.5-17V input.

• 1x S-4904T Transmitter (Gold mount)
• 1x S-4904R Receiver (Gold mount)
• 10x Antennas
• 1x Articulating arm trestle
• 1x Crab clamp
• 1x D-tap to 5.5/2.1mm pole cable
• 1x 5.5/2.1mm pole power adaptor
• 2x Flat screwdriver (for band configuration)

Two years conditional.

S-7904 Antenna for Wireless Transmission System